If your phone gets wet, the first thing you should do is turn it off and remove it from the water source as soon as possible to prevent further damage. Here are some steps you can take to try to save your phone:
- Remove the case and SIM card (if applicable): This will help the phone dry more quickly and reduce the risk of corrosion.
- Dry the exterior of the phone: Use a soft, dry cloth to gently pat the phone dry, being careful not to spread the water around or force it further into the phone.
- Use absorbent materials: You can try using absorbent materials such as rice, silica gel packets, or paper towels to help draw out the moisture from the phone. Place the phone in a sealed container or bag with the absorbent material for at least 24 hours.
- Avoid heat sources: Do not use a hair dryer, oven, or other heat source to dry the phone, as this can damage the internal components.
- Wait before turning the phone on: Give the phone ample time to dry before attempting to turn it on. Ideally, you should wait at least 24 hours before attempting to power on the phone.
If these steps do not work, you may need to take the phone to a professional repair shop or contact the manufacturer for assistance. In some cases, the damage may be too severe to repair, and you may need to replace the phone.
How long should you wait after your phone gets wet?
You should wait at least 24 hours after your phone gets wet before attempting to turn it on. This will give the phone enough time to dry out thoroughly, which can help prevent damage to the internal components.
It’s important to note that the amount of time it takes for a wet phone to dry out can vary depending on several factors, such as the amount of water that entered the phone and the type of phone you have. Some phones may require more time to dry out than others, so it’s always best to err on the side of caution and give your phone ample time to dry before attempting to turn it on.
If you’re unsure whether your phone has dried out completely, you can try inserting the battery (if it’s removable) and turning the phone on. If the phone doesn’t turn on, or if you notice any signs of water damage (such as a distorted screen or strange noises), you should take the phone to a professional repair shop or contact the manufacturer for assistance.
The amount of time a phone can be underwater before it cannot be saved varies depending on several factors, such as the type of phone, the depth of the water, and the duration of exposure.
How long can your phone be underwater before it cannot be saved?
In general, if a phone has been submerged in water for more than 30 minutes, there is a high likelihood of significant water damage that may render the phone irreparable. However, even a few seconds of exposure to water can potentially damage the phone if it enters through the phone’s ports or other openings.
The longer the phone remains submerged, the greater the risk of damage to the internal components, especially if the water contains minerals or other contaminants that can cause corrosion or short circuits. It’s also important to note that saltwater can be particularly damaging to electronic devices due to its high salt content.
If your phone has been submerged in water for any amount of time, it’s best to take immediate action to dry it out and prevent further damage. Follow the steps outlined in my previous response and avoid attempting to turn the phone on until it has had sufficient time to dry out completely. If you notice any signs of damage or malfunction after attempting to dry out the phone, it may be necessary to take it to a professional repair shop or contact the manufacturer for assistance.
Are there phones that are truly waterpoof?
There are phones that are marketed as “waterproof,” but it’s important to note that no phone is completely waterproof. Instead, phones that are advertised as waterproof are typically water-resistant to varying degrees, meaning they can withstand exposure to water to a certain extent.
The level of water resistance can vary depending on the phone model and manufacturer, but many modern smartphones are designed to be able to withstand exposure to water to some degree. For example, some phones may have an IP67 or IP68 rating, which means they can survive immersion in water up to a certain depth and for a certain duration without sustaining damage.
However, it’s important to remember that even phones with a high level of water resistance may not be able to withstand all types of exposure to water. For example, exposure to saltwater or other liquids can potentially cause damage to the internal components of the phone. Additionally, water resistance can deteriorate over time as a result of wear and tear or damage to the phone’s ports or other openings.
To be safe, it’s always best to avoid exposing your phone to water whenever possible, even if it is marketed as water-resistant. If you do need to use your phone in or near water, be sure to follow the manufacturer’s instructions for water resistance and avoid exposing the phone to water for extended periods or at extreme depths.
We Hate Paywalls Too!
At Cantech Letter we prize independent journalism like you do. And we don't care for paywalls and popups and all that noise That's why we need your support. If you value getting your daily information from the experts, won't you help us? No donation is too small.